Digital Weight Machine Calibration At Rs0 ?

💡 Note: This process applies to most digital weighing machines with a similar weight capacity (Exp: 20kg–100kg).

✅ Step-by-Step Calibration Guide:

• Fully Charge the Machine:
  • Make sure your weighing machine is properly charged before starting calibration. A low battery or dead battery can affect accuracy.
• Turn On the Machine:
  • Press the power button(Switch) and wait for the display to show 0, 000, or 0000 depending on the programming model.

• Place a Known Weight:
  • Put a standard weight (like 1kg, 2kg, or 5kg…) on the platform.
  • If the displayed weight is incorrect. Now, proceed.
• Enter Calibration Mode:
  • Press MR (or UP arrow) + MODE at same time.
  • The display should show "Password" or "Enter".

• Proceed to the Input Screen (Display):
  • Press the TARE/ZERO button.
  • The screen should now show "00000".

• Enter the Correct Value According Your Machine:
  • Example: For a 2kg weight and a machine range of 0–100kg (where one digit represents 10g), So you enter 02000.
  • Use:
    • UP button (MR) to increase numbers.
    • M+ button (usually side button) to move forward between digits.

• Confirm Its:
  • After entering the correct value, press TARE/ZERO button.
  • The machine will now reset and display the correct weight.

🎥 Need Help?

If you face any issues or want to see the process visually, click the button below for helpful video tutorials.